"Let Them Eat Cake"- The Jabot Mold Sequel

All I can say about this next blog post is WOW!  Joanne Wieneke outdid herself with the amazing combination of molds, creativity and some awesome talent.

I know that you have been waiting for the sequel of the Jabot Mold tutorial. This is it...

I have gathered a number of very beautiful and versatile molds to join the Jabot Mold Collection from DTC and incorporated them to a cake design, inspired by a quote  "Let Them Eat Cake", the phrase commonly misattributed to the lady named Marie Antoinette....

(photos from Wikipedia)

If you scroll back, reading archives of DTC Blogs, a lot of molds have already been presented and how to use it.  I used all necessary Tips and Techniques mentioned in DTC Tutorial blogs:
Lace Press Mold Tutorial by Morsels by Mark
New Applique Lace Molds by Sherrie Ortiz
Bridal Motif Lace by Renea Feagin
The Jabot Mold by Joanne Wieneke
Tuscan Jewelry Bowl by Joanne Wieneke

This should be easy, all you need are: fondant or gumpaste, shortening,  gumglue, royal icing , palette knife or  plastic clay knife, toothpicks, rolling pins, small scissors, paint brush, some gold and pearl dust  and a lot of patience and a ton of time....

Here are the list of molds that I have used for this cake:

 Brooch 2C FiligreeLeaf

 (pipe dots of royal icing over  the filigree leaf)

Floral1 Rose Daisy

Floral Heart with Rose Center

Floral2 Square Floral

Floral2 Rose Swag Pair

Brooch 2C Square oval

(fold left and right gem wing and stretch to a sausage by rolling the middle gem between your fingers to create the arm)

Jabot Molds

Jabot #1

Jabot #2

 Brooch1C Filigree

Scroll - Single Fancy - Right & Left

           Brooch 2C Square oval
(cut wings of the mold and randomly position them to make a gem buns on hair)

Stack up your cakes, in this case, I used styrofoam for visual purposes.

Thank you very much Glenda and DTC for giving me the opportunity to work with your beautiful and fantastic products!

 I hope you all enjoyed this inspirational cake as much as I enjoyed creating them...

Happy Cake Decorating!

 Joanne Wieneke

The Little Cake Patch

Products Used:

Brooch 2C FiligreeLeaf

Floral1 Rose Daisy

Floral Heart with Rose Center
Floral2 Square Floral
Floral2 Rose Swag Pair
Brooch 2C Square oval
Jabot #1
Jabot #2
Brooch1C Filigree
Scroll - Single Fancy - Right & Left
Lace 4 - Flora Swag

Get Out of the Dog House!

This cake is sure to let you out of the dog house!

It is a pretty simple cake -- but the spiked dog collar bottom border puts it over the top.

Roll out a length of fondant to the size for the mold.

Lay the fondant on top of mold cavity and press in.  To get the fondant into the spikes you will need to really push it in.

Use a rolling pin to smooth down the back of the mold.  Take a small knife and trim off the excess.

Pop in the freezer to harden -- this is necessary to get the spikes out intact.  Have a bowl of ice cream while you wait!

Turn the mold upside down and gently roll up.  As you come to each spike, gently stretch the mold to pop it out.  I accidentally ripped one off - while it was still frozen I put it in place with a touch of gum glue and it stayed affixed just fine.

Get some supplies out to dust the spikes!  I mixed a little of Albert Uster's gold dust with vodka.

Paint the spikes.

Products Used:
Spiked Dog Collar
Doggie Assortment
Paw Print Texture Mat

Ambulance Paramedic Bag using DTC Zipper Mould

Jo Marshall-Orr lends her talents to the DTC blog show off the zipper mold and her amazing talents.

I made this bag using the DTC Zipper mould - I found it a fantastic way to get definition and it looked so real I was asked many a time if I had used real zips.

This mould is really easy to use with this simple tutorial

Equipment: DTC Zipper Mould, rolling pin, stitching tool, Fondant knife, white fat & 50/50mix of Fondant/Gumpaste

Very lightly grease mould with white fat
Roll 50/50 Fondant/Gumpaste  into a log same approximate length of mould

Squish 50/50 mix into mould

roll over with rolling pin to smooth & get good definition

Scrape off excess using a fondant knife

Place in freezer for 5-10 minutes this helps alot in de-moulding anything from silicone

De-Mould I start at the thicker end

Flip the Mould over & place zipper onto backside this makes it easy to remove after

Using the stitching tool add a deeper impression along the zip

Doesn't this look so real! I love this mould.

As shown in the photos I then used a little rectangle of the same colour of the cake & using the stitching tool made a piece to fit over the ends of the zip for a sewn in look.

Hope you enjoy this mould as much as I do

Jo from Ciccio Cakes

http://www.facebook.com/CiccioCakes

To get the effect of the 2 zippers joining just fold under the end bits and use the stitching between them 

Product Used:
Zipper - Closed

Also Available:
Zipper - Open

Pigs, Bacon and more!

Jeannie Gearin does it again with another amazing blog post.  This time it is a great idea for Father's Day!

Grilling and Father's Day just go together. Many men believe themselves
to be the King of  the Grill and that was behind the theme
for this cake and the matching cupcakes. And at the end of this
post, one more use for a pig mold.

For the board, I covered it with light brown 50/50 paste and then imprinted

the it with a wood grain impression mat. I took a ruler

and marked off wood plank lines. I used a mix of brown and black food

color with vodka and painted in the deepest areas to make them

stand out more. Then, to make it look like painted barn wood, I brushed the board with red dust. I  set aside to let it dry.

I made the ribbon by cutting a circle and letting it dry over night.

I used the ribbon cutter to cut a long one inch wide

strip and gathered the center up into folds. I attached it

to the circle with piping gel and let dry.

 The pig molds can be filled with one color gumpaste and

color brushed  on or with multiple colors. I used pink for the

 pig face and red for the bandana.

I always have better luck with chilling molds in the freezer

for a few minutes.Then, releasing them after letting it sit at

room temperature until it is not so cold and brittle.

I found the markers were easier to use than the paintbrush
for adding details. Mostly, I liked that it dried quicker,
but I am sure it is a matter of personal preference.
A little pink blush on the cheeks and inner ear gave the
pig face much more character.

 The two pigs together make a sweet pair.

These pigs are a nice size for cupcake decorating as well as
cake designs.
I made the banners using a clay letter embosser from the
craft store.

The rope border was made with a clay gun.
The fence was also done with the wood grain
impression mat. A toothpick is inside the fence posts
for support. This was a fun cake to make
and could be customized for several different
summer occasions.

Pigs =Bacon!

Maple Bacon Toffee

{with Chocolate Pigs}

I used my current favorite recipe for toffee which is

from the book Sweet Confections by Nina Wanat.

I added 1/2 teaspoon of maple extract.

After spreading the toffee out on a silpat and

 allowing it to cool, I spread 6 ounces of

semisweet chocolate on top and let chill.

Then, melt another 6 ounces of semisweet chocolate

 and spread that on the other side of the toffee.

While still warm, sprinkle about 2 slices of crispy, crumbled

bacon on top. Sprinkle 1/2 teaspoon fleur de sel to the

top of the toffee, working quickly before it cools.

Break into pieces and enjoy.

Any standard toffee recipe can be used.

Add to a bag with chocolate pigs and

tie with a bow for Father's Day gift, or
a summer hostess gift or...

Products Used:

Pig #1

Pig #2

Pig Pair

Tree Bark Texture Mat

For more amazing work from Jeannie, check out her blog, The Pastry Tip!

Puppy Paw Print Tutorial

Here's a quick tutorial for Decorate The Cake's cute paw print mold.  I used black fondant and mixed in some tylose powder.  Tylose powder makes the fondant dry faster and harder.  I rarely use gumpaste anymore, and instead use fondant with tylose for modeling or making flowers.  Start with a small ball of the fondant/tylose and then press it into the mold.  It may take a few tries, but soon you'll figure out the right amount of fondant needed to fit perfectly in the pad or the toes.

If the fondant is not wanting to stay in the mold or is sticking to your fingers, dust on a little corn starch.

Press the fondant into the mold and continue with the rest of the paw prints.

Let the paw prints dry for an hour or so in the mold.  If you are in a hurry, you could put the mold in the freezer for 10 minutes.  When I was ready to flip them out, I put a cake circle on top, flipped it over and then carefully peeled back the mold.  Most of the prints came out easily, but I did have to  help a few of them out with a small paint brush.  I use a paint brush as opposed to a toothpick or fingernail (yikes!) so I won't leave a mark in the fondant prints.  

Make more prints, if needed.  The bottom tier of my cake was a 12" round and I used about 20 paw prints to go around the cake.  When you're ready to put them on your cake, first put a small dot of buttercream on the back.

Then using a toothpick or paintbrush, pick up the print by the buttercream dot and carefully place it on the cake.  

I loved having this mold for this cake.  I wanted all of the prints to be basically identical.  I'm afraid if I would have tried to model them by hand, they wouldn't have been so uniform in shape and size.  And it would have taken me FOREVER to make each one by hand because I'm such a perfectionist - I seriously could spend 20 minutes making one print!!!  The other thing I like about the mold is the raised or rounded dimension it gives the print.  Something I couldn't achieve with a Cricut or cutting a stencil by hand with an X-acto knife.  

This mold is very versatile.  You could use melted chocolate in a squeeze bottle or even isomalt.   It could also be used as a texture mat.  Above all - just HAVE FUN playing with your cake!

Guest post by Charla Tatom

www.celebratewithcake.net

Products Used:

Paw Prints Texture Mat - Large

Similar Item: 

Paw Prints Texture Mat